Start a new topic

Wiring Diagram K1850

HI Does anyone have a wiring diagram for the Countax K1850 particularly the powered grass collector. Mine is stuck up in the air and there is a plug under the dashboard that sends the relays and deck into chaos when moved but also has the grass collector wire going through it so I suspect there is a fault in the wiring. When I check the signal in the rear 3 pin connector to the grass box there are 2 signals coming through1 pin, 1 earth and no signal in the 3rd pin?


1 Comment

Hi Chris It may be connected to one of the micro switches in the actuator lifter on the grass box. I appeared to have a similar problem and found one of the micro switches had rusted and sticking. Possibly sending a wrong signal. I just cleaned it and all appears well now. Was not the board as I first thought.
Login or Signup to post a comment